Mold abatement BONITA CA that clears the air and the cause

Containment, removal and verification for homes across San Diego County

Mold abatement BONITA CA homeowners can schedule the same week starts with finding the moisture, not just scrubbing the stain. We contain the work area, remove contaminated drywall and insulation, and run HEPA filtration until spore counts drop. Whether you found black mold behind drywall in a 91902 ranch home or musty odors from a crawl space, we handle the removal and the source.

Explore the decaying walls and entrance of an abandoned building, showing urban decay.

What mold abatement BONITA CA actually involves

Mold abatement BONITA CA is the controlled removal of mold-contaminated materials, spores and moisture sources from a building, performed inside sealed containment so spores do not spread to clean rooms. It is not wiping visible spots with bleach. We set negative air pressure, run air scrubbers with HEPA filters, bag debris in the containment, and verify the result with spore trap air sampling before we pull the plastic down.

Bonita sits in a coastal San Diego County microclimate where morning marine layer keeps attic sheathing and crawl space joists damp for hours after sunrise. Add a roof leak, a slab leak, or a bathroom with poor ventilation, and mold colonizes porous materials in 24 to 48 hours. If you have been searching for a mold elimination service in BONITA after water damage, the priority is stopping the moisture first, then removing what is already colonized.

Why Bonita homeowners schedule abatement early

Why Bonita homeowners schedule abatement early

Mold does not stop at the surface you can see. These are the outcomes our Bonita customers care about most when they call us.

Spores stop spreading

Containment plastic and a negative air machine keep spores from drifting into bedrooms and closets during removal. We seal HVAC registers in the work zone and run a HEPA air scrubber continuously, so the rest of your house stays livable while we work.

The moisture source gets fixed

Removing mold without fixing the leak is a callback waiting to happen. We use a thermal imaging camera and moisture meter to trace the water to its origin, whether that is a failed roof flashing, a slow supply line, or grading that pushes water against the stem wall.

Air quality is verified

We collect spore trap air samples before and after abatement and compare the indoor counts against an outdoor control sample. You get documentation showing the work area returned to normal fungal ecology, which matters if you are selling or filing an insurance claim.

Odors leave with the mold

That musty smell is microbial volatile compounds, not just damp air. Once contaminated drywall, insulation and framing are removed and treated with an antimicrobial solution, the odor goes with them. We finish with a mold encapsulant on exposed framing to seal what remains.

How our mold abatement process runs

Every job follows the same five stages, from the first inspection to the final clearance sample. Here is what you will see us do, and roughly how long each stage takes.

1

Inspection and mapping

We walk the property with a moisture meter, thermal imaging camera and borescope inspection camera to find every wet zone, including hidden mold behind baseboards and inside wall cavities. Expect 45 to 90 minutes. You get a written scope with photos before any containment goes up.

2

Containment and pressure

We build 6-mil containment plastic around the work area, seal it to the floor and ceiling, and install a negative air machine with HEPA filtration. This takes two to four hours on a typical room. From this point, air flows into the containment, not out of it.

3

Removal and cleaning

Contaminated drywall, insulation and other porous materials come out and get bagged inside the containment. Structural framing is HEPA vacuumed, then treated with an antimicrobial solution. On heavier jobs we use dry ice blasting to strip mold from framing without adding moisture.

4

Treatment and encapsulation

After cleaning, exposed framing and sheathing get a mold encapsulant so any residual spores stay locked in place. For hard-to-reach cavities we use a fogging machine with a product like Concrobium or Benefect. This stage usually runs one to three hours depending on square footage.

5

Clearance testing

We run a spore trap air sampler inside the work area and one outdoors as a control. If indoor counts are at or below outdoor levels, containment comes down. If not, we re-clean and re-test. Most Bonita jobs clear on the first sample, and you receive the lab report.

Trained to IICRC and California standards

Mold work is a licensed trade in California, and we hold the credentials to prove it. Our technicians carry IICRC Mold Remediation (AMRT) and IICRC Water Damage Restoration (WRT) certifications, which means they were trained on the same standards used by insurance adjusters and industrial hygienists. We follow California Department of Public Health guidelines for assessment and clearance, and we work under a California Contractors State License Board (CSLB) license. We also hold EPA Lead-Safe Certification and OSHA 30-Hour Construction training, which matters on pre-1978 Bonita homes where disturbing painted drywall can release lead dust.

  • IICRC AMRT certified technicians on every abatement crew
  • IICRC WRT training for jobs that start as water damage
  • California Department of Public Health clearance protocols
  • EPA Lead-Safe Certification for pre-1978 homes
  • OSHA 30-Hour Construction trained supervisors on site
Trained to IICRC and California standards

Why Bonita calls us for mold abatement

We are a local crew, not a franchise dispatch. That means the person who inspects your home is the person who runs the job and answers your questions.

Same-week scheduling

Most Bonita inspections get booked within two to three business days, and emergency calls for active water intrusion get priority. If you are staring at a wet ceiling after a roof leak, call (833) 929-5837 and we will tell you honestly whether you need us today or can wait for a scheduled slot.

Documented clearance

Every abatement job ends with a written clearance report and lab results from spore trap air sampling. That paperwork is what your insurance adjuster, real estate agent or buyer will ask for. We hand it to you before we leave the property.

Containment done properly

A mold abatement contractor BONITA homeowners trust keeps the work zone sealed. We use 6-mil containment plastic, negative air pressure and HEPA filtration on every job, no exceptions. That is the difference between removing mold and spreading it through your house.

Straight pricing, no surprises

You get a written scope and price before containment goes up. If we open a wall and find more than the inspection showed, we stop and call you with the new number before continuing. No surprise invoices at the end of the job.

What our mold abatement service includes

Every abatement job we run in Bonita includes the same core scope. Here is what you get, and what we scope separately so there are no surprises on the invoice.

What's Included

Containment and negative air

We build 6-mil containment plastic around the work area and run a negative air machine with HEPA filtration for the duration of the job. This keeps spores from spreading into the rest of your home while we remove contaminated materials.

Removal of contaminated materials

Drywall, insulation and other porous materials with visible growth or elevated moisture come out and get bagged inside the containment. We remove only what is contaminated, which keeps the job scope and cost reasonable.

HEPA vacuuming and antimicrobial treatment

Framing and hard surfaces get HEPA vacuumed, then treated with an antimicrobial solution. On heavier growth we use dry ice blasting to strip mold from wood without introducing moisture into the cavity.

Encapsulation of exposed framing

After cleaning, exposed framing and sheathing get a mold encapsulant. This locks down any residual spores and gives the cavity a clean surface before new drywall goes back up.

Post-remediation clearance testing

We collect spore trap air samples inside the work area and outdoors as a control. You get the lab report showing indoor counts returned to normal fungal ecology before containment comes down.

Mold problems we solve for Bonita homeowners

Most of our Bonita calls start with one of these four problems. Each one has a different cause, and each one needs a different abatement approach.

Problem

Black mold behind drywall after a hidden leak

By the time you see the stain, the cavity behind it has been wet for weeks. Spores spread into adjacent rooms and the HVAC system, and the musty odor becomes constant.

Solution

We use a borescope inspection camera and moisture meter to map the full extent, then open the wall inside containment. Contaminated drywall and insulation come out, framing gets HEPA vacuumed and treated, and we verify with clearance sampling.

Problem

Musty odors from crawl space with no visible mold

Crawl space mold often grows on joists and insulation where you cannot see it. The odor rises into living spaces, and the moisture keeps feeding the growth until the source is fixed.

Solution

We inspect the crawl space with thermal imaging and a moisture meter, remove contaminated insulation, treat the joists with an antimicrobial solution, and install a vapor barrier to keep ground moisture out. The odor goes with the mold.

Problem

Attic mold from a roof leak

Attic mold spreads across sheathing and rafters quickly because attic temperatures and humidity swing widely. Left alone, it degrades the roof structure and can pull into living space through ceiling gaps.

Solution

We test the sheathing and rafters, then abate with dry ice blasting to strip growth without adding moisture. Exposed wood gets encapsulated, and we document the roof leak location so your roofer can fix the source.

Problem

Bathroom mold from poor ventilation

A bathroom without a properly sized exhaust fan stays humid after every shower. Mold colonizes grout, caulk and drywall within weeks, and it keeps coming back no matter how often you clean.

Solution

We remove contaminated drywall and caulk, treat the framing, and encapsulate before new materials go in. We also measure the bathroom and tell you what CFM exhaust fan will actually clear the moisture so the mold does not return.

When Bonita properties need mold abatement

1

A supply line under the kitchen sink has been dripping slowly for months, and the cabinet base is soft and discolored.

Solution:

We inspect with a moisture meter and thermal imaging to find the full wet zone, then set containment and remove the swollen cabinet base and any contaminated drywall behind it. Framing gets HEPA vacuumed, treated and encapsulated.

Outcome:

The cabinet base is replaced, the wall cavity is clean and dry, and you have a clearance report showing spore counts returned to normal.

2

A winter storm pushed water under a patio door, and the carpet and baseboards in the adjacent room stayed wet for days.

Solution:

We inspect for hidden mold behind baseboards, remove contaminated carpet pad and drywall as needed, and run HEPA filtration during removal. If the subfloor is affected, we scope that separately so you know the full picture.

Outcome:

The room is dry, the mold is removed, and the space is ready for new flooring without the risk of regrowth under it.

3

A rental property in Bonita has had tenant complaints about a musty smell in the hallway for months, and the owner wants documentation.

Solution:

We test air quality with spore trap cassettes, inspect with a borescope camera to find the source, and abate with full containment. We provide a written report with photos and lab results that the owner can share with tenants or an insurer.

Outcome:

The odor is gone, the source is documented, and the owner has paperwork showing the property was properly abated.

4

A commercial office space in San Diego County had a roof leak over a storage room, and the ceiling tiles and insulation are visibly moldy.

Solution:

We work after hours to avoid disrupting business, set containment around the storage room, remove contaminated ceiling tiles and insulation, and treat the deck above. Clearance testing confirms the space is safe before staff return.

Outcome:

The storage room is clean, the business keeps running, and the property manager has a clearance report for the file.

Tools and methods we use for abatement

Tools & Equipment

Thermal imaging camera

Finds temperature differences that indicate hidden moisture behind drywall, under floors and in ceiling cavities before we open anything up.

Moisture meter

Confirms wet readings in framing, drywall and subfloor so we know exactly how far the moisture has traveled from the source.

Borescope inspection camera

Lets us see inside wall cavities and behind baseboards without cutting a large opening, so the abatement scope is accurate.

Air scrubber with HEPA filter

Runs continuously inside containment to capture airborne spores and keep the work area under negative pressure.

Negative air machine

Maintains negative pressure in the containment so air flows in, not out, preventing cross-contamination to clean rooms.

HEPA vacuum

Removes settled spores from framing and hard surfaces after contaminated materials are removed.

Spore trap air sampler

Collects air samples before and after abatement so we can compare indoor counts against an outdoor control.

Fogging machine

Applies antimicrobial products like Concrobium or Benefect into cavities and HVAC systems that hand cleaning cannot reach.

Methods

IICRC S520 mold remediation standard

We follow the IICRC S520 standard for mold remediation, which sets the containment, removal and clearance protocols used across the industry. It is the same standard insurance adjusters and industrial hygienists reference when they review a job.

Negative pressure containment

Every abatement job runs under negative pressure with HEPA filtration. Air flows into the containment, not out, so spores cannot migrate to bedrooms, closets or HVAC returns during removal.

Dry ice blasting

For framing and attic sheathing, dry ice blasting strips mold without adding water. It is faster than hand scrubbing on large surfaces and leaves no secondary residue to clean up.

Antimicrobial treatment and encapsulation

After removal, framing gets treated with an antimicrobial solution and then coated with a mold encapsulant. This locks down residual spores and gives the cavity a clean surface before new materials go in.

Post-remediation verification

We collect spore trap air samples inside the work area and outdoors as a control. Clearance requires indoor counts at or below outdoor levels, and you get the lab report before containment comes down.

How mold abatement runs in Bonita specifically

Bonita sits in a coastal San Diego County microclimate where morning marine layer keeps attic sheathing and crawl space joists damp for hours after sunrise. That daily moisture cycle is why we see more attic mold from roof leaks and crawl space mold in Bonita than in inland areas. The housing stock matters too. Many homes in 91902 and 91910 were built in the 1960s and 1970s with crawl space foundations and original roof sheathing, which means any slow leak has had decades to feed growth. We inspect with a moisture meter and thermal imaging camera before opening anything, because in these older homes the wet zone is often wider than the visible stain. If you need mold abatement after water damage BONITA CA, we also coordinate with your roofer or plumber so the source gets fixed before we encapsulate. We follow California Department of Public Health guidelines for clearance, and we work under a CSLB license.

Service Areas

Bonita Springs City Center

Older ranch homes with crawl space foundations and original roof sheathing. Slow leaks here often feed mold for years before it shows on the ceiling.

San Carlos Estates

Larger lots with mature trees mean roof debris and shaded roof surfaces. Attic mold from roof leaks is a common call in this neighborhood.

The Brooks

Newer construction with tighter building envelopes. When moisture gets in, it stays in, so bathroom mold from poor ventilation shows up quickly.

Bonita National Golf & Country Club

Golf course irrigation keeps ambient humidity elevated. We see more crawl space mold and musty odors from crawl space in this area.

Imperial Bonita Estates

Mix of older and renovated homes. Renovations sometimes cover up old moisture issues, so we inspect carefully before scoping abatement.

Local Considerations

Coastal marine layer and morning humidity

Attic sheathing and crawl space joists stay damp for hours after sunrise. This daily cycle feeds mold growth even without an active leak, so ventilation and vapor barriers matter here.

Aging roof sheathing on 1960s and 1970s homes

Original roof sheathing is more porous and holds moisture longer. When a roof leak starts, mold colonizes faster and spreads further across the attic.

Crawl space foundations without vapor barriers

Ground moisture rises into the crawl space and condenses on joists. We install vapor barriers as part of crawl space abatement to stop the cycle.

Bathrooms with undersized or missing exhaust fans

Humidity stays in the bathroom after showers and feeds mold on grout, caulk and drywall. We measure the space and recommend the right CFM fan as part of the fix.

Hallway drywall after supply line leak

Before

A slow supply line leak behind the hallway wall had been wet for weeks. Visible black mold covered about 12 square feet of drywall, and the musty odor reached the adjacent bedroom. Moisture readings in the framing were elevated to 28 percent.

After

We removed the contaminated drywall and insulation inside containment, HEPA vacuumed and treated the framing, and encapsulated the cavity. Clearance samples came back at outdoor levels on the first test. New drywall went up three days later.

Maintenance & Follow-up

We recommended a moisture alarm under the sink and an annual visual check of supply lines. Catching a slow leak early keeps the cavity dry and prevents regrowth.

Before

Musty odors had been rising into the living room for months. Inspection found mold growth on about 40 percent of the crawl space joists, with no vapor barrier and relative humidity holding above 70 percent. Insulation was saturated and had to come out.

After

We removed the contaminated insulation, HEPA vacuumed and treated the joists with an antimicrobial solution, and installed a 6-mil vapor barrier across the crawl space floor. Post-work humidity readings dropped into the 50s, and the odor cleared within a week.

Maintenance & Follow-up

We suggested a crawl space dehumidifier set to 50 percent relative humidity and an annual inspection before the rainy season. Keeping the space dry is what keeps the mold from returning.

Before

A roof leak over the garage had been dripping for at least one season. Attic sheathing and two rafters showed mold growth across roughly 60 square feet. The homeowner noticed a musty smell in the garage and a faint stain on the ceiling below.

After

We abated with dry ice blasting on the sheathing and rafters, which stripped the growth without adding moisture. Exposed wood was encapsulated, and we documented the leak location for the roofer. Clearance testing confirmed normal spore levels.

Maintenance & Follow-up

We recommended a roof inspection each fall before the rainy season and a quick attic check after any storm. Fixing the leak is what keeps the attic dry long term.

What mold abatement costs in Bonita

Typical 2026 pricing for mold abatement in Bonita runs $1,200 to $4,500 for most residential jobs. Small bathroom or closet abatements start around $850. Whole-room jobs with drywall removal, crawl space abatement and attic work run higher. The biggest cost driver is how much contaminated material has to come out, followed by access difficulty and whether clearance testing is included. We give you a written scope and price before containment goes up, and if we open a wall and find more than the inspection showed, we stop and call you before continuing.

Pricing Factors

Square footage affected

A 10-square-foot bathroom patch is a different job than 100 square feet of hallway drywall. More area means more containment, more removal and more disposal, which drives the price up proportionally.

Material type

Porous materials like drywall and insulation have to be removed and replaced. Hard surfaces like tile, framing and concrete can often be cleaned and encapsulated, which keeps the cost lower.

Access difficulty

Crawl spaces and attics take longer because containment is trickier and movement is slower. A bathroom on the main floor is faster to contain and clean than a low-clearance crawl space.

Moisture source repair

Fixing the leak, whether it is a roof flashing, supply line or grading issue, is scoped separately because it is a different trade. We coordinate with your roofer or plumber so the source is fixed before we encapsulate.

Clearance testing

Post-remediation air sampling adds lab costs but gives you documentation that the space cleared. It is included in our standard scope because it protects you and satisfies insurance and real estate requirements.

Emergency scheduling

After-hours or emergency abatement for active water intrusion costs more because we mobilize a crew outside normal hours. If the situation can wait for a scheduled slot, the price is lower.

Investment Range

$850 - $4,500 depending on scope

Based on project scope

Value You Get

The price covers containment, removal, treatment, encapsulation and clearance testing, not just a surface wipe. That is what makes the result hold up and what your insurance adjuster or buyer will want to see.

Frequently Asked Questions

Have questions? We have answers.

Call Us
How much does mold abatement cost in BONITA CA?

Most residential mold abatement in BONITA CA runs $1,200 to $4,500 in 2026, with small bathroom jobs starting around $850 and whole-room or crawl space jobs going higher. Price depends on square footage, how much drywall and insulation has to come out, and whether clearance testing is included. We give you a written scope before work starts.

What is included in mold abatement in BONITA California?

A standard job includes containment setup, negative air pressure with HEPA filtration, removal of contaminated materials, HEPA vacuuming, antimicrobial treatment, encapsulation of exposed framing, and post-remediation spore trap air sampling. Source repair, such as fixing a roof leak or supply line, is scoped separately because it is a different trade. We tell you upfront what is in and what is not.

How long does mold abatement take in BONITA CA?

A single bathroom or closet typically takes one to two days. A full room with drywall removal runs two to four days. Crawl space and attic jobs often take three to five days because access is slower and containment is trickier. Clearance lab results add another 24 to 48 hours before we can pull containment down.

Is mold abatement covered by homeowners insurance in BONITA?

It depends on the cause. Sudden events like a burst supply line or a roof leak from a storm are usually covered. Long-term neglect, such as a slow drip under a sink that went unnoticed for months, is typically excluded. We document the moisture source with photos and moisture readings so your adjuster has what they need to make the call.

Credentials and reviews

Certifications

IICRC Mold Remediation (AMRT) by Institute of Inspection, Cleaning and Restoration Certification
IICRC Water Damage Restoration (WRT) by Institute of Inspection, Cleaning and Restoration Certification
EPA Lead-Safe Certification by U.S. Environmental Protection Agency
OSHA 30-Hour Construction by Occupational Safety and Health Administration
California Contractors State License Board (CSLB) license by California Contractors State License Board

Reviews

Google

They found mold behind our bathroom wall that two other companies missed. Containment was tight, the crew was respectful of our home, and the clearance report came back clean. Worth every dollar.

Yelp

Crawl space mold removal done right. They installed a vapor barrier and the musty smell is finally gone. The technician explained everything and did not try to upsell us on work we did not need.

BBB

We had attic mold from a roof leak and they handled the abatement plus documented everything for our insurance claim. Fast, professional and the paperwork was exactly what the adjuster needed.

Google

Called about a musty smell in our hallway. They inspected with a camera, found the source, and had the abatement done in three days. Clearance testing confirmed it was clean before they pulled containment down.

Related Services

Mold Inspection Near Me

Before abatement, we inspect. Our Bonita mold inspection locates moisture sources and visible growth with thermal imaging and a borescope, so the abatement scope is accurate and nothing gets missed behind walls.

Mold Inspection Near Me

Mold Inspection

A full mold inspection in Bonita covers attic, crawl space, bathrooms and HVAC closets. We map every wet zone and grade the growth so you know what needs abatement and what just needs cleaning.

Mold Inspection

Mold Testing

Mold testing in Bonita uses spore trap cassettes and air sampling to identify what is growing and at what concentration. Results guide the abatement scope and give you a baseline for post-remediation comparison.

Mold Testing

Mold Testing Near Me

If you need mold testing near you in Bonita, we collect air and surface samples and send them to an accredited lab. Turnaround is typically 24 to 48 hours, and we walk you through the report.

Mold Testing Near Me

Certified Mold Inspector

Our certified mold inspector in Bonita follows California Department of Public Health guidelines for assessment. You get a written report with photos, moisture readings and a recommended scope of work.

Certified Mold Inspector

Black Mold Inspection

Black mold behind drywall is the most common call we get in Bonita. We inspect with a borescope camera to confirm what is growing inside the cavity before recommending abatement.

Black Mold Inspection

Home Mold Inspection

A home mold inspection in Bonita covers every room, the attic, the crawl space and the HVAC system. We check for musty odors from crawl space, attic mold from roof leaks and bathroom mold from poor ventilation.

Home Mold Inspection

Residential Mold Testing

Residential mold testing in Bonita gives homeowners lab-backed answers. We sample air inside and outside, compare counts, and tell you whether the indoor environment is elevated.

Residential Mold Testing

Commercial Mold Inspection

Commercial mold inspection in Bonita covers offices, retail and multi-family buildings. We work after hours to avoid disrupting tenants and document everything for property managers.

Commercial Mold Inspection

Mold Remediation Company

As a local mold remediation company serving Bonita, we handle both the removal and the source repair coordination. One crew, one scope, one clearance report at the end.

Mold Remediation Company

Emergency Mold Testing Services

Emergency mold testing in Bonita is available when water intrusion is active. We test quickly so abatement can start before mold spreads further into drywall and insulation.

Emergency Mold Testing Services

Same Day Mold Testing

Same day mold testing in Bonita is available for urgent situations. We collect samples the same day you call, and lab results typically come back within 24 to 48 hours.

Same Day Mold Testing

Basement Mold Inspection

Basement mold after flooding is common in Bonita homes with below-grade space. We inspect with moisture meters and thermal imaging to find hidden mold behind baseboards and framing.

Basement Mold Inspection

Attic Mold Testing And Removal

Attic mold from roof leaks is a frequent Bonita problem. We test the sheathing and rafters, then remove and treat affected wood as part of the abatement scope.

Attic Mold Testing And Removal

Air Quality And Mold Testing

Air quality and mold testing in Bonita measures spore concentrations room by room. It is the best way to confirm whether hidden mold is affecting the air you breathe.

Air Quality And Mold Testing

Mold Remediation Near Me

Searching for mold remediation near you in Bonita? We are local, licensed and IICRC certified. Call (833) 929-5837 and we will schedule an inspection this week.

Mold Remediation Near Me

Crawl Space Mold Removal

Crawl space mold removal in Bonita starts with fixing the moisture source, then removing contaminated insulation and treating joists. We finish with a vapor barrier to keep the space dry.

Crawl Space Mold Removal

Bathroom Mold Removal Service

Bathroom mold from poor ventilation is one of our most common Bonita calls. We remove contaminated drywall and caulk, treat the framing, and recommend a properly sized exhaust fan.

Bathroom Mold Removal Service

Toxic Mold Removal

Toxic mold exposure symptoms range from headaches to respiratory irritation. If you suspect toxic mold in your Bonita home, we test first, then abate with full containment and HEPA filtration.

Toxic Mold Removal

Professional Mold Removal

Professional mold removal in Bonita means containment, negative air pressure and clearance testing, not a spray-and-wipe. We do the full job and document the result.

Professional Mold Removal

Mold Cleanup Near Me

Mold cleanup near you in Bonita covers removal of contaminated materials, HEPA vacuuming, antimicrobial treatment and odor control. We handle the mess and leave the space clean.

Mold Cleanup Near Me

Water Damage Mold Remediation

Water damage mold remediation in Bonita starts with drying the structure, then removing any mold that already colonized. We handle both stages so you are not coordinating two contractors.

Water Damage Mold Remediation

Mold Spore Testing

Mold spore testing in Bonita uses spore trap cassettes to measure airborne concentrations. We compare indoor and outdoor samples to determine whether abatement is needed.

Mold Spore Testing

Post Remediation Mold Testing

Post remediation mold testing in Bonita verifies the abatement worked. We sample after cleaning and before containment comes down, so you have proof the space cleared.

Post Remediation Mold Testing

Mold Fogging Treatment

Mold fogging treatment in Bonita reaches cavities and HVAC systems that hand cleaning cannot. We use a fogging machine with products like Concrobium or Benefect after removal is complete.

Mold Fogging Treatment

Dry Ice Blasting Mold

Dry ice blasting mold in Bonita strips growth from framing without adding moisture. It is ideal for attics and crawl spaces where wet cleaning would make the problem worse.

Dry Ice Blasting Mold

Affordable Mold Remediation

Affordable mold remediation in Bonita does not mean cutting corners on containment. We scope the job honestly, remove only what is contaminated, and give you a written price before we start.

Affordable Mold Remediation

24 Hour Mold Removal

24 hour mold removal in Bonita is available for active water intrusion and emergency situations. Call (833) 929-5837 and we will tell you honestly whether you need us tonight or can wait for a scheduled slot.

24 Hour Mold Removal

Odor Removal Mold

Odor removal mold service in Bonita targets the musty smell at its source. Once contaminated materials are removed and framing is treated, the odor goes with them.

Odor Removal Mold

Get mold abatement BONITA CA scheduled this week

We are IICRC certified, CSLB licensed and local to San Diego County. Call (833) 929-5837 and we will schedule an inspection, give you a written scope, and tell you honestly what the job will take.