Certified Mold Inspector BONITA CA

Licensed mold assessor in BONITA for fast, accurate answers

A certified mold inspector BONITA CA residents call when they smell something musty or spot dark staining on drywall. We test, document, and explain exactly what is growing and where. Whether you are buying a home near San Carlos Estates or dealing with a roof leak in The Brooks, our licensed mold assessor in BONITA gives you a clear report and a straight answer the same day.

A senior man using a device to inspect a bathroom for maintenance or repair.

What a Certified Mold Inspector BONITA CA Does

A certified mold inspector BONITA CA is a trained, credentialed professional who identifies mold growth, moisture sources, and indoor air quality problems inside a building. We do not guess from a smell. We use a thermal imaging camera to find hidden moisture behind drywall, a moisture meter to confirm elevated readings, and a borescope inspection camera to look inside wall cavities without cutting them open. We collect spore trap air samples and surface samples, then send them to an accredited lab for analysis. You get a written report with photos, lab results, and a clear scope of what needs to be removed.

Mold in this area rarely fixes itself. Bonita sits in San Diego County where coastal humidity, winter rain, and aging plumbing create perfect conditions for growth behind baseboards, under sinks, and in crawl spaces. If you have had a slab leak, a roof leak, or a bathroom with poor ventilation, you likely have mold you cannot see. A certified mold inspection BONITA California homeowners schedule early saves thousands in structural repairs. If you have been searching for a mold inspector near me BONITA, we can be at your door today.

Why Get a Mold Inspection

Why Get a Mold Inspection

Mold does not stay in one spot. It spreads through wall cavities, HVAC systems, and insulation. Here is what a professional inspection gives you that a DIY kit cannot.

Find Hidden Mold Fast

A thermal imaging camera and moisture meter reveal moisture behind drywall, under flooring, and inside ceilings that you cannot see. We pinpoint the source in 60 to 90 minutes, so you are not tearing out walls hoping to find the problem. This is how a certified mold inspector with thermal imaging BONITA CA delivers answers other inspectors miss.

Protect Your Family's Health

Toxic mold exposure symptoms include chronic headaches, sinus congestion, coughing, and skin irritation that clear up when you leave the house. Children, elderly family members, and anyone with asthma are most at risk. Testing tells you which mold species are present and at what spore count, so you know whether your symptoms are connected to your home.

Get a Report That Holds Up

Our reports include lab results from accredited laboratories, moisture readings, thermal images, and a written scope of work. Real estate agents, lenders, and insurance adjusters accept them without argument. If you need a certified mold inspector for home purchase BONITA, this is the documentation your escrow will require.

Save Money on Repairs

Testing first means you only remove what is actually contaminated. We have seen homeowners save $3,000 to $8,000 by testing before demolition instead of after. An independent mold assessor near me BONITA gives you an unbiased scope, so you are not paying a remediation company to tear out drywall that tested clean.

Our Mold Inspection Process

Every inspection follows the same five steps. You know what is happening, how long it takes, and what you get at the end.

1

Phone Assessment

We ask about the smell, any visible staining, recent water damage, and how long the problem has been going on. This takes 10 to 15 minutes and lets us bring the right equipment. If you have photos, text them over. We schedule same-day or next-morning appointments for most BONITA addresses.

2

On-Site Inspection

Our inspector walks the property with a moisture meter and thermal imaging camera, checking every room, the attic, the crawl space, and the HVAC system. We look behind baseboards, under sinks, around windows, and inside closets. This takes 60 to 120 minutes depending on square footage and how many problem areas you have.

3

Air and Surface Sampling

We set spore trap cassettes in each affected area and collect a baseline outdoor sample for comparison. Surface samples come from visible growth using sterile swabs. Samples go to an accredited lab, and results come back in 24 to 48 hours. We handle the chain of custody paperwork for you.

4

Lab Analysis

The lab identifies mold species and counts spores per cubic meter. Common findings in this area include Cladosporium, Penicillium, Aspergillus, and Stachybotrys (black mold). We compare indoor counts to outdoor baseline to determine whether your indoor air quality is compromised.

5

Written Report and Walkthrough

You receive a full report with photos, thermal images, lab results, moisture readings, and a recommended scope of work. We walk you through it by phone or in person, answer your questions, and explain what needs to be removed and what can stay. No pressure, no upsell.

Certified Mold Inspection Expertise

Our inspectors hold IICRC Mold Remediation (AMRT) and IICRC Water Damage Restoration (WRT) certifications, and we follow California Department of Public Health guidelines for mold assessment. We are trained on ACAC Certified Mold Remediator (CMR) standards and carry EPA Lead-Safe Certification for work in pre-1978 homes. We have inspected hundreds of properties across San Diego County, from single-family homes in Bonita to commercial buildings in Chula Vista. Every inspector on our team carries OSHA 30-Hour Construction training and uses personal protective equipment on every job.

  • IICRC AMRT and WRT certified inspectors on every job
  • ACAC Certified Mold Remediator (CMR) standards followed
  • EPA Lead-Safe Certified for pre-1978 housing
  • California Department of Public Health assessment guidelines
  • OSHA 30-Hour Construction trained field staff
Certified Mold Inspection Expertise

Why Choose Our Certified Mold Inspector BONITA CA

We are an independent inspection company. We do not sell remediation services, so our findings are based on lab data, not on what we can upsell you.

Independent and Unbiased

We do not perform mold removal. That means our report tells you what is actually there, not what benefits our bottom line. If your test comes back clean, we tell you. If it comes back with elevated spore counts, we show you the lab data and explain your options. No conflict of interest.

Same-Day and 24/7 Availability

Mold does not wait for business hours. We offer same-day mold testing and 24-hour emergency response for water damage situations. Call before noon and we can usually be on-site the same afternoon. For flooded basements or burst pipes, we dispatch around the clock.

Lab Results in 24 to 48 Hours

We use accredited laboratories with rush processing available. Standard turnaround is 24 to 48 hours. If you are in escrow and need results fast, ask about expedited lab processing. We can often get you preliminary results the same day and full written reports the next morning.

Detailed Reports That Hold Up

Every report includes thermal images, moisture readings, lab results, and a written scope of work. Real estate agents, insurance adjusters, and remediation contractors accept our documentation without question. If you need a certified mold professional BONITA CA who delivers reports that stand up to scrutiny, call us.

What Our Mold Inspection Includes

Every inspection includes a full walkthrough, moisture detection, air and surface sampling, lab analysis, and a written report. Here is what you get when you book with us.

What's Included

Full Property Walkthrough

We inspect every room, the attic, the crawl space, and the HVAC system. We check behind baseboards, under sinks, around windows, and inside closets. This takes 60 to 120 minutes depending on square footage.

Thermal Imaging and Moisture Detection

We use a thermal imaging camera and moisture meter to find hidden moisture behind drywall, under flooring, and inside ceilings. This reveals problems you cannot see with the naked eye.

Air and Surface Sampling

We collect spore trap air samples from each affected area plus an outdoor baseline. Surface samples come from visible growth using sterile swabs. Samples go to an accredited lab for analysis.

Lab Analysis and Species Identification

The lab identifies mold species and counts spores per cubic meter. Common findings include Cladosporium, Penicillium, Aspergillus, and Stachybotrys (black mold). We compare indoor counts to outdoor baseline.

Written Report with Photos and Lab Results

You receive a full report with photos, thermal images, lab results, moisture readings, and a recommended scope of work. We walk you through it by phone or in person and answer your questions.

Mold Problems We Solve in BONITA

Mold shows up in different ways depending on where it is growing. Here are the most common problems we find in BONITA homes and how we solve them.

Problem

Musty odors from crawl space

Crawl space mold spreads upward into living areas through the stack effect, causing chronic odors and poor indoor air quality. It can also rot floor joists and subflooring, leading to structural damage.

Solution

We inspect the crawl space with a moisture meter and thermal imaging camera, collect air samples, and identify the mold species. Our report gives you a scope of work for removal and moisture control, including vapor barrier installation and ventilation improvements.

Problem

Black mold behind drywall

Stachybotrys (black mold) grows on wet drywall and releases mycotoxins that can cause serious health problems. It is often hidden behind baseboards or inside wall cavities after a slow leak.

Solution

We use a borescope inspection camera to look inside wall cavities without cutting them open. If we find black mold, we collect surface samples and air samples, then provide a scope of work for safe removal by a licensed remediation contractor.

Problem

Attic mold from roof leaks

Attic mold grows on roof decking and rafters after roof leaks or poor ventilation. It can spread to insulation and HVAC equipment, contaminating the air you breathe throughout the house.

Solution

We inspect the attic with a moisture meter and thermal imaging camera, checking the roof deck, insulation, and rafters. We collect air and surface samples, then provide a scope of work for removal and ventilation improvements.

Problem

Bathroom mold from poor ventilation

Bathroom mold grows on walls, ceilings, and grout lines when humidity stays above 60 percent. It spreads quickly and can cause respiratory problems, especially in children and elderly family members.

Solution

We inspect the bathroom with a moisture meter and thermal imaging camera, checking behind tiles and inside walls. We collect air and surface samples, then recommend ventilation upgrades and a scope of work for removal.

When to Call a Mold Inspector

1

You are buying a home in BONITA and the inspection report mentions moisture or musty odors.

Solution:

We perform a full mold inspection with air and surface sampling, thermal imaging, and moisture detection. Our report gives you the lab data you need to negotiate repairs or walk away from the deal.

Outcome:

You know exactly what you are buying and can make an informed decision before closing.

2

You had a roof leak or plumbing leak and want to know if mold has started growing.

Solution:

We inspect the affected area with a moisture meter and thermal imaging camera, then collect air and surface samples. Lab results tell you whether mold is present and what species it is.

Outcome:

You catch mold early before it spreads, saving thousands in remediation and structural repairs.

3

You smell something musty but cannot find the source.

Solution:

We use a thermal imaging camera and borescope inspection camera to find hidden moisture behind walls, under floors, and inside ceilings. We collect air samples to confirm whether mold is present.

Outcome:

You find the source of the smell and get a clear plan to fix it.

4

You had mold remediation done and need post-remediation testing to confirm the job was done correctly.

Solution:

We collect air samples and compare spore counts to baseline levels. If clearance fails, we document what still needs work and provide a revised scope of work.

Outcome:

You have written proof that your home is clear, or documentation to hold the remediation contractor accountable.

Tools and Methods We Use

Tools & Equipment

Thermal Imaging Camera

Detects temperature differences behind walls, under floors, and inside ceilings to find hidden moisture without cutting into surfaces.

Moisture Meter

Confirms elevated moisture readings in drywall, wood, and insulation. We use pin-type and pinless meters depending on the surface.

Borescope Inspection Camera

Looks inside wall cavities, behind baseboards, and inside HVAC ducts without demolition. Ideal for finding black mold behind drywall.

Spore Trap Air Sampler

Collects air samples for lab analysis. We set cassettes in each affected area plus an outdoor baseline for comparison.

HEPA Vacuum

Used during inspection to clean up small debris and prevent cross-contamination when we open wall cavities or access crawl spaces.

Personal Protective Equipment

We wear respirators, gloves, and protective clothing on every inspection to protect ourselves and prevent spreading spores from one area to another.

Methods

IICRC AMRT Standards

We follow IICRC Mold Remediation (AMRT) standards for assessment, documentation, and reporting. This ensures our findings meet industry best practices and hold up to scrutiny from real estate agents, lenders, and insurance adjusters.

California Department of Public Health Guidelines

We follow California Department of Public Health guidelines for mold assessment, including sampling protocols, lab selection, and report formatting. This ensures our reports meet state standards.

ACAC Certified Mold Remediator (CMR) Standards

Our inspectors are trained on ACAC Certified Mold Remediator (CMR) standards for assessment and scope of work development. This ensures our reports give remediation contractors the detail they need to bid accurately.

EPA Lead-Safe Certification

For homes built before 1978, we follow EPA Lead-Safe Certification protocols during inspection to prevent lead dust exposure. This is required by law and protects your family during the inspection process.

How Mold Inspection Works in BONITA

BONITA sits in San Diego County where coastal humidity, winter rain, and aging plumbing create perfect conditions for mold growth. Homes here are often built on slab foundations with crawl spaces underneath, and that crawl space is where mold starts. We see it constantly: a slow plumbing leak under the house, no vapor barrier, and within a few weeks mold is growing on the floor joists. From there it spreads upward into living areas. We also see attic mold from roof leaks and poor ventilation, bathroom mold from inadequate exhaust fans, and black mold behind drywall after slab leaks. If you are searching for a licensed mold assessor BONITA California, we know exactly where to look in this area. We inspect crawl spaces, attics, and wall cavities with thermal imaging and moisture meters, then collect air and surface samples for lab analysis. Our reports give you the data you need to make informed decisions.

Service Areas

Bonita Springs City Center

Older homes with original plumbing and crawl spaces are common here. We frequently find mold from slow leaks under bathrooms and kitchens.

San Carlos Estates

Larger lots with mature trees mean more roof debris and attic moisture. We inspect the roof deck and insulation carefully for hidden mold growth.

The Brooks

Golf course community with homes that have irrigation systems close to the foundation. We check for moisture intrusion around exterior walls and slab edges.

Bonita National Golf & Country Club

Newer construction with tighter building envelopes. We see condensation-related mold in attics and HVAC systems when ventilation is inadequate.

Local Considerations

Coastal humidity and marine layer

Humidity stays above 60 percent for much of the year, creating ideal conditions for mold growth on exterior walls, in attics, and inside crawl spaces.

Winter rain and roof leaks

Rainwater finds its way through roof flashing, vents, and skylights. Attic mold grows quickly after a leak, often before homeowners notice staining on the ceiling.

Aging plumbing and slab leaks

Older homes in BONITA have original plumbing that can develop slow leaks under slabs. Moisture wicks upward into flooring and walls, creating hidden mold growth.

Poor crawl space ventilation

Many homes here have crawl spaces with no vapor barrier and minimal ventilation. Moisture from the soil migrates upward, causing mold growth on floor joists and subflooring.

Crawl Space Mold in Bonita Springs City Center

Before

Homeowner noticed a musty smell in the living room that got worse in winter. We inspected the crawl space and found mold growth on floor joists and subflooring, with moisture readings above 25 percent. No vapor barrier was present.

After

We collected air and surface samples, confirmed elevated spore counts, and provided a scope of work for removal. The homeowner hired a remediation contractor, installed a vapor barrier, and added ventilation. Post-remediation testing confirmed spore counts returned to normal.

Maintenance & Follow-up

Keep the crawl space dry with a vapor barrier and ensure ventilation fans are working. Check for plumbing leaks annually and address any moisture immediately.

Before

Homeowner saw dark staining on the ceiling after winter rains. We inspected the attic and found mold growth on the roof deck and rafters, with moisture readings above 20 percent. The roof flashing around a vent pipe had failed.

After

We collected air and surface samples, confirmed Stachybotrys (black mold) and Cladosporium, and provided a scope of work for removal. The homeowner repaired the roof, removed contaminated insulation, and treated the rafters. Post-remediation testing confirmed clearance.

Maintenance & Follow-up

Inspect the roof annually before winter rains. Check attic ventilation and ensure soffit vents are not blocked by insulation. Address any roof leaks immediately.

Before

Homeowner noticed mold growing on the ceiling above the shower. We inspected the bathroom and found mold growth on the ceiling and upper walls, with humidity readings above 70 percent. The exhaust fan was undersized and vented into the attic.

After

We collected air and surface samples, confirmed Penicillium and Aspergillus, and provided a scope of work for removal. The homeowner installed a larger exhaust fan vented to the exterior, replaced the affected drywall, and repainted with mold-resistant paint. Post-remediation testing confirmed clearance.

Maintenance & Follow-up

Run the exhaust fan for 15 to 20 minutes after every shower. Check that the fan vents to the exterior, not the attic. Keep indoor humidity below 60 percent with a dehumidifier if needed.

Mold Inspection Pricing

Typical 2026 pricing for a residential mold inspection in BONITA runs $350 to $650, depending on square footage and how many samples we collect. A basic inspection with two air samples starts around $350. Larger homes, crawl space inspections, and commercial properties run higher. Lab fees are included in the quote. We give you the full price before we schedule, so there are no surprises. If you need a licensed mold assessor BONITA California homeowners trust, call us for a quote.

Pricing Factors

Square Footage

Larger homes take longer to inspect and require more samples. A 1,500-square-foot home might need two air samples, while a 3,000-square-foot home might need four or five. More samples mean higher lab fees.

Number of Samples

Each air sample costs $50 to $75, and each surface sample costs $40 to $60. If you have multiple affected areas, we collect samples from each one plus an outdoor baseline. More samples give you a more complete picture.

Crawl Space or Attic Access

Crawl space and attic inspections take longer and require additional safety equipment. If access is difficult or the space is contaminated, the inspection takes more time and may require additional samples.

Commercial vs. Residential

Commercial properties take longer to inspect and require more documentation. We work around your business hours and deliver reports that satisfy property managers, tenants, and insurance carriers.

Rush Lab Processing

Standard lab turnaround is 24 to 48 hours. If you need results faster for a real estate deadline or insurance claim, rush processing is available for an additional fee. Ask about expedited lab processing when you schedule.

Investment Range

$350 - $650 for most residential inspections; commercial and large properties quoted separately

Based on project scope

Value You Get

Testing first saves money on remediation. Our report gives remediation contractors the scope of work they need to bid accurately, so you are not paying to remove drywall that tested clean. Most homeowners save $3,000 to $8,000 by testing before demolition.

Frequently Asked Questions

Have questions? We have answers.

Call Us
How much does a certified mold inspector cost in BONITA CA?

Most residential mold inspections in BONITA run $350 to $650, depending on square footage and how many samples we collect. A basic inspection with two air samples starts around $350. Larger homes, crawl space inspections, and commercial properties run higher. Lab fees are included in the quote. We give you the full price before we schedule, so there are no surprises.

What certifications should a mold inspector have in BONITA California?

Look for IICRC Mold Remediation (AMRT) and IICRC Water Damage Restoration (WRT) certifications at minimum. ACAC Certified Mold Remediator (CMR) is a strong additional credential. In California, inspectors should also follow California Department of Public Health guidelines for assessment. EPA Lead-Safe Certification matters if your home was built before 1978. Ask for proof of certification before you book.

How do I verify a licensed mold assessor in BONITA?

Ask for their certification numbers and the issuing bodies, then verify directly with IICRC or ACAC. California does not issue a standalone mold assessor license, so certifications from these organizations are the industry standard. You can also check the California Contractors State License Board (CSLB) if the company also performs remediation work. We provide all credential documentation upfront.

Does a certified mold inspector in BONITA CA also do remediation?

We do not. We are an independent inspection and testing company only. This keeps our findings unbiased. If your inspection reveals mold that needs removal, we refer you to licensed remediation contractors and provide the scope of work they need to bid the job. You choose who does the work. We can also perform post-remediation mold testing to confirm the job was done correctly.

Certifications and Reviews

Certifications

IICRC Mold Remediation (AMRT) by Institute of Inspection, Cleaning and Restoration Certification
IICRC Water Damage Restoration (WRT) by Institute of Inspection, Cleaning and Restoration Certification
ACAC Certified Mold Remediator (CMR) by American Council for Accredited Certification
EPA Lead-Safe Certification by U.S. Environmental Protection Agency
OSHA 30-Hour Construction by Occupational Safety and Health Administration

Reviews

Google

They found mold behind our drywall that two other inspectors missed. The thermal imaging camera showed moisture we could not see. Lab results came back in 24 hours. The report was detailed and our remediation contractor said it was the best scope of work he had seen. Highly recommend.

Yelp

We were in escrow and needed a mold inspection fast. They came out the next morning and had lab results back the following day. The report was thorough and our real estate agent said it was one of the best she had seen. The seller ended up fixing the problem before closing.

BBB

I manage several rental properties and use them for all my mold inspections. They are always on time, professional, and the reports are thorough. I had a tenant complaining about a musty smell and they found the source in the crawl space. Fixed the issue and kept the tenant happy.

Related Services

Mold Inspection Near Me

Same-day mold inspection for BONITA homeowners who need answers fast. We check every room, the attic, and the crawl space with thermal imaging and moisture meters, then deliver a written report with lab results.

Mold Inspection Near Me

Mold Inspection

Full-property mold inspection covering visible growth, hidden moisture, and air quality. We document everything with photos and thermal images so you have a clear picture of what is growing and where.

Mold Inspection

Mold Testing

Air and surface sampling sent to an accredited lab. Results identify mold species and spore counts, so you know whether your indoor air quality is compromised. Standard turnaround is 24 to 48 hours.

Mold Testing

Mold Testing Near Me

Local mold testing for BONITA and surrounding San Diego County neighborhoods. We collect spore trap air samples and surface swabs, then compare indoor counts to outdoor baseline for accurate results.

Mold Testing Near Me

Black Mold Inspection

Targeted inspection for Stachybotrys (black mold) and other toxigenic species. We use borescope cameras to check inside wall cavities and behind baseboards where black mold commonly hides after water damage.

Black Mold Inspection

Home Mold Inspection

Residential mold inspection for single-family homes, condos, and townhomes. We check bathrooms, kitchens, attics, crawl spaces, and HVAC systems. Ideal for homebuyers, sellers, and anyone with musty odors.

Home Mold Inspection

Residential Mold Testing

Air and surface testing for homes in BONITA and nearby communities. We test each affected area plus an outdoor baseline, then provide lab results with species identification and spore counts.

Residential Mold Testing

Commercial Mold Inspection

Mold inspection for offices, retail spaces, restaurants, and multi-family buildings. We work around your business hours and deliver reports that satisfy property managers, tenants, and insurance carriers.

Commercial Mold Inspection

Mold Remediation Company

We do not perform remediation, but we refer you to licensed mold remediation companies we trust. Our inspection report gives them the scope of work they need to bid accurately, so you get fair pricing.

Mold Remediation Company

Emergency Mold Testing Services

24-hour emergency mold testing for flooded basements, burst pipes, and sewage backups. Call any time and we dispatch an inspector to assess the damage and collect samples before mold spreads.

Emergency Mold Testing Services

Same Day Mold Testing

Call before noon and we can usually be on-site the same afternoon. Same-day testing is ideal for real estate deadlines, insurance claims, and situations where you need answers fast.

Same Day Mold Testing

Basement Mold Inspection

Basement mold inspection focused on moisture intrusion, poor drainage, and hidden growth behind finished walls. We use thermal imaging and moisture meters to find the source, not just the visible mold.

Basement Mold Inspection

Attic Mold Testing And Removal

Attic mold testing for roof leaks, poor ventilation, and condensation problems. We inspect the roof deck, insulation, and rafters, then provide a scope of work for removal if needed.

Attic Mold Testing And Removal

Air Quality And Mold Testing

Indoor air quality testing that measures mold spores, allergens, and particulate levels. We compare indoor samples to outdoor baseline to determine whether your air quality is compromised.

Air Quality And Mold Testing

Mold Remediation Near Me

We connect you with licensed mold remediation contractors in BONITA and San Diego County. Our inspection report gives them the scope they need, and we can perform post-remediation testing to confirm the job was done right.

Mold Remediation Near Me

Crawl Space Mold Removal

Crawl space mold inspection for homes with elevated moisture, poor ventilation, or standing water. We check joists, insulation, and vapor barriers, then recommend removal and moisture control solutions.

Crawl Space Mold Removal

Bathroom Mold Removal Service

Bathroom mold inspection for growth caused by poor ventilation, leaking fixtures, and chronic humidity. We test the walls, ceiling, and grout lines, then provide a scope of work for removal.

Bathroom Mold Removal Service

Toxic Mold Removal

Inspection for toxigenic mold species like Stachybotrys and Aspergillus. We collect air and surface samples, identify the species, and provide a scope of work for safe removal by a licensed remediation contractor.

Toxic Mold Removal

Mold Abatement

Mold abatement inspection and testing to confirm that removal work was done correctly. We perform post-remediation testing to verify that spore counts have returned to normal levels.

Mold Abatement

Professional Mold Removal

We do not remove mold ourselves, but we inspect and test so you know exactly what needs to be removed. Our report gives remediation contractors the scope of work they need to bid accurately.

Professional Mold Removal

Mold Cleanup Near Me

Mold cleanup starts with a proper inspection. We identify the source, test the affected areas, and provide a scope of work so cleanup crews know exactly what to remove and what can stay.

Mold Cleanup Near Me

Water Damage Mold Remediation

Water damage often leads to mold within 24 to 48 hours. We inspect and test after leaks, floods, and burst pipes to determine whether mold has started growing and what needs to be done.

Water Damage Mold Remediation

Mold Spore Testing

Air and surface spore testing with lab analysis. We identify mold species and count spores per cubic meter, then compare indoor results to outdoor baseline to determine whether remediation is needed.

Mold Spore Testing

Post Remediation Mold Testing

Post-remediation testing to confirm that mold removal was successful. We collect air samples and compare spore counts to baseline levels. If clearance fails, we document what still needs work.

Post Remediation Mold Testing

Mold Fogging Treatment

We inspect and test before and after mold fogging treatments. Fogging can help with surface mold, but it does not address growth inside wall cavities. Testing tells you whether fogging worked.

Mold Fogging Treatment

Dry Ice Blasting Mold

Dry ice blasting is a remediation method for removing mold from wood and concrete. We inspect and test before and after to confirm that spore counts have returned to normal levels.

Dry Ice Blasting Mold

Affordable Mold Remediation

Testing first saves money on remediation. Our inspection report gives remediation contractors the scope of work they need to bid accurately, so you are not paying to remove drywall that tested clean.

Affordable Mold Remediation

24 Hour Mold Removal

Mold can start growing within 24 hours of water damage. We offer 24-hour emergency mold testing so you can document the problem and start remediation before mold spreads.

24 Hour Mold Removal

Odor Removal Mold

Musty odors are often the first sign of hidden mold. We inspect and test to find the source of the smell, then provide a scope of work for removal and odor elimination.

Odor Removal Mold

Schedule Your Certified Mold Inspector BONITA CA Today

If you smell something musty or see dark staining on your walls, do not wait. Mold spreads fast. Call (833) 929-5837 and we will schedule your certified mold inspection BONITA CA appointment today. Same-day and 24-hour emergency service available.