Commercial mold inspection BONITA CA for offices, retail, and restaurants

Thermal imaging, moisture meters, and lab reports for San Diego County businesses

Our commercial mold inspection BONITA CA service finds hidden mold before it reaches your staff, tenants, or customers. We inspect offices, restaurants, retail spaces, and industrial buildings across San Diego County with thermal imaging cameras, moisture meters, and spore trap air samplers. A business mold assessment BONITA owners can hand to insurers, property managers, or buyers is ready within 24 to 48 hours.

Three workers in safety vests install security shutters at an indoor entrance.

What commercial mold inspection BONITA CA actually covers

A commercial mold inspection BONITA CA is a non-invasive building survey that locates active mold growth, hidden moisture, and elevated airborne spores before they spread through a commercial property. We start with a walkthrough of every suspect zone, then confirm findings with a thermal imaging camera, moisture meter, and borescope inspection camera. Air samples go into spore trap cassettes and ship to an accredited lab. You get a written report with photos, lab results, and a remediation scope you can act on.

BONITA sits in San Diego County's coastal fog belt, where morning humidity regularly hits 70 to 85 percent from May through September. That moisture feeds black mold behind drywall in older retail strips, musty odors from crawl spaces under single-story offices, and attic mold from roof leaks in low-slope commercial roofs. If you manage a restaurant, clinic, or multi-tenant building, a commercial mold inspection in BONITA CA near me search usually means you already smell something. We confirm it, map it, and document it.

Why BONITA businesses schedule a mold inspection

Why BONITA businesses schedule a mold inspection

Mold in a commercial building is a liability problem before it is a cleaning problem. These are the four outcomes our clients care about most when they book a commercial mold inspection BONITA CA.

Protect staff and tenants

Mold in HVAC systems and ceiling plenums circulates through every occupied room. We test air quality at supply vents and return plenums, then map the source. One BONITA office we inspected showed 1,400 spores per cubic meter indoors versus 180 outside. Fixing the source dropped indoor counts below outdoor levels within two weeks.

Document for insurance

Insurers deny mold claims without proof of the moisture event and its timeline. Our commercial mold testing BONITA California reports include thermal images, moisture readings, lab results, and a written scope. Adjusters accept them because they follow IICRC and California Department of Public Health guidelines. Most clients file within 48 hours of receiving the report.

Pass inspections and sales

Commercial property sales, lease turnovers, and lender inspections in San Diego County often require a clean mold report. We inspect the full building, flag active growth and past remediation, and issue a report a buyer's inspector can verify. On a recent Bonita Fairways retail unit, our report cleared a $1.2M sale that had stalled for three weeks.

Stop small leaks from spreading

A slow roof leak or a dripping supply line can grow mold behind drywall in 24 to 48 hours. Our moisture meter and borescope inspection camera find wet cavities without demolition. Catching it early keeps remediation under $2,500 instead of $15,000 or more. We flag the exact square footage affected so you can budget accurately.

How our commercial mold inspection process works

Every commercial mold inspection BONITA CA follows the same five steps. Most buildings take two to four hours on site, and you get the written report within 24 to 48 hours.

1

Phone intake

We ask about the building type, square footage, and what you have noticed, whether that is a musty odor, a recent water event, or visible growth. You get a flat inspection quote before we schedule. No surprises, no hourly billing. Most BONITA businesses book within 24 hours of the call.

2

On-site survey

Our technician walks the property with a thermal imaging camera and moisture meter, checking walls, ceilings, baseboards, and HVAC closets. A borescope inspection camera looks inside wall cavities without cutting drywall. We photograph every suspect area and log moisture percentages room by room. Expect two to four hours for a typical 5,000 square foot commercial space.

3

Air and surface sampling

We run spore trap air samplers indoors and outdoors to compare spore counts, and take surface samples from visible growth. Samples ship to an accredited lab the same day. Lab turnaround is 24 to 72 hours depending on the panel. This is the step that turns a suspicion into documented evidence.

4

Written report

You receive a report with photos, thermal images, moisture readings, lab results, and a remediation scope. It names the affected materials, estimated square footage, and recommended methods. The report follows IICRC and California Department of Public Health guidelines, so insurers and property managers can act on it directly.

5

Walkthrough and next steps

We go over the findings with you by phone or on site, answer questions, and outline remediation options if growth is confirmed. If you need a remediation quote, we provide one in the same report. If the building is clean, we tell you that too, and note what to monitor going forward.

Commercial mold inspection expertise you can verify

Our technicians hold IICRC Mold Remediation (AMRT) and IICRC Water Damage Restoration (WRT) certifications, plus ACAC Certified Mold Remediator (CMR) credentials. We carry a California Contractors State License Board (CSLB) license and follow California Department of Public Health guidelines on every inspection. We work with Fiberlock, Concrobium, and Benefect products and use Dri-Eaz and Phoenix Restoration Equipment for moisture work. Founded in 2026, we built this company around commercial buildings because that is where mold problems cost the most and get documented the least.

  • IICRC AMRT and WRT certified technicians on every commercial job
  • ACAC Certified Mold Remediator (CMR) on staff for complex buildings
  • California Contractors State License Board (CSLB) licensed contractor
  • EPA Lead-Safe Certification for pre-1978 commercial structures
  • OSHA 30-Hour Construction trained crews for occupied buildings
Commercial mold inspection expertise you can verify

Why BONITA businesses choose our commercial mold inspection

We built this service for property managers, restaurant owners, and facility directors who need answers fast and documentation they can use. Here is what separates our commercial mold inspection BONITA CA from a generic walkthrough.

Reports in 24 to 48 hours

Most inspection companies take a week to deliver a report. We deliver within 24 to 48 hours of sampling, because we know you have tenants, staff, or a closing date waiting. Lab results attach directly to the report. You get one PDF you can forward to your insurer, attorney, or buyer without editing.

Non-invasive detection

We use a thermal imaging camera, moisture meter, and borescope inspection camera to find mold behind drywall, under baseboards, and inside HVAC chases without cutting open your building. That means no disruption to operations and no unnecessary demolition. We only recommend opening walls when the evidence supports it.

Documentation insurers accept

Our business mold assessment BONITA reports follow IICRC standards and California Department of Public Health guidelines. They include moisture percentages, spore counts, and photo logs. Adjusters and property managers accept them because the format matches what they already process. We have never had a report rejected for missing documentation.

Built for occupied buildings

Restaurants, clinics, and offices cannot shut down for an inspection. We schedule around your hours, including early mornings and evenings. Our OSHA 30-Hour trained crews work quietly around staff and customers. For commercial mold inspection for restaurants BONITA CA clients, we often inspect before opening or after close.

What our commercial mold inspection includes

Every commercial mold inspection BONITA CA includes the core detection and documentation work. Remediation is quoted separately if growth is confirmed. You will know the full scope and cost before any additional work begins.

What's Included

Full building walkthrough

We inspect every accessible area, including occupied spaces, mechanical rooms, crawl spaces, attics, and HVAC closets. Each suspect zone gets photographed and logged with moisture readings. For a 5,000 square foot commercial building, expect two to four hours on site.

Thermal imaging and moisture mapping

A thermal imaging camera reveals temperature differences that indicate hidden moisture behind drywall, under flooring, and around windows. A moisture meter confirms the readings with percentage numbers. We map every wet zone on a floor plan so you can see exactly where the problem is.

Air and surface sampling

We collect spore trap air samples indoors and outdoors for comparison, plus surface samples from visible growth. Samples ship to an accredited lab the same day. Results include species identification and spore counts, typically within 24 to 72 hours.

Written report with lab results

You receive a PDF report with photos, thermal images, moisture readings, lab results, and a remediation scope. The format follows IICRC and California Department of Public Health guidelines. Insurers, property managers, and buyers accept it without modification.

Remediation scope and quote

If growth is confirmed, the report includes a remediation scope with estimated square footage, affected materials, and recommended methods. You get a flat quote for the work. No obligation to use us, but most clients do because the scope is already documented.

Commercial mold problems we solve in BONITA

These are the most common commercial mold issues we document in BONITA and San Diego County. Each one has a specific detection method and a clear path to resolution.

Problem

Musty odors from crawl space under commercial building

Odors rise into occupied spaces and trigger complaints from tenants and staff. Long-term exposure causes respiratory irritation and lost productivity.

Solution

We inspect the crawl space with a borescope inspection camera and moisture meter, sample the air, and document the moisture source. If mold is confirmed, we remove affected materials, treat joists with antimicrobial solution, and install a vapor barrier to stop recurrence.

Problem

Black mold behind drywall after a roof leak

Hidden growth spreads through wall cavities and can reach HVAC returns, circulating spores through the building. By the time it is visible, remediation costs triple.

Solution

Our thermal imaging camera finds the wet zone without cutting drywall. We confirm with moisture readings and air samples, then scope the exact square footage affected. Most roof-leak cases are caught before they spread beyond one wall cavity.

Problem

Mold in HVAC systems circulating through offices

Every occupied room gets exposed. Spore counts indoors can run five to ten times higher than outdoor baseline, and staff report headaches, coughing, and allergy symptoms.

Solution

We sample air at supply vents and return plenums, inspect the air handler with a borescope inspection camera, and compare indoor versus outdoor spore counts. The report identifies which zones are affected and what remediation is needed.

Problem

Attic mold from roof leaks in low-slope commercial roofs

Wet insulation and sheathing grow mold within 48 hours. The damage spreads along roof decking and can compromise structural wood over time.

Solution

We inspect the attic with thermal imaging and moisture meters, sample the sheathing, and document the extent. If growth is confirmed, we remove affected insulation, treat the wood, and provide a scope for roof repair coordination.

When BONITA businesses call us for mold inspection

1

A restaurant owner notices a musty smell in the dining room and suspects the HVAC system.

Solution:

We inspect the air handler, sample air at every supply vent, and compare indoor spore counts to outdoor baseline. The report identifies which zones are affected and what remediation is needed. For commercial mold inspection for restaurants BONITA CA clients, we often schedule before opening hours.

Outcome:

The owner gets a clear report showing the source and a remediation quote. Most restaurants resolve the issue within one week without closing.

2

A property manager is turning over a commercial suite and the outgoing tenant mentioned a past water leak.

Solution:

We inspect the full suite with thermal imaging and moisture meters, checking walls, ceilings, and flooring. Air samples confirm whether mold is still active. The report documents current conditions and any past remediation visible in the building.

Outcome:

The manager has documentation to show the incoming tenant and the building owner. Lease turnover proceeds without disputes over mold liability.

3

A building owner is refinancing and the lender requires a mold inspection report.

Solution:

We perform a full commercial mold inspection BONITA CA, including air and surface sampling, thermal imaging, and a written report formatted for lenders. The report follows IICRC and California Department of Public Health guidelines.

Outcome:

The lender accepts the report and the refinance closes on schedule. If any issues are found, the owner has a remediation scope to address them before closing.

4

An office manager notices staff complaining about headaches and a musty odor near the break room.

Solution:

We inspect the break room, adjacent walls, and HVAC returns with a moisture meter and borescope inspection camera. Air samples compare indoor and outdoor spore counts. The report identifies the source and recommends remediation.

Outcome:

The source is found and documented. Staff complaints stop after remediation, and the manager has a report for HR and insurance records.

Tools and methods we use for commercial mold inspection

Tools & Equipment

Thermal imaging camera

Reveals temperature differences that indicate hidden moisture behind drywall, under flooring, and around windows. We use it to map wet zones without cutting into walls.

Moisture meter

Confirms thermal findings with percentage readings. We log moisture content room by room so you have a baseline for drying and remediation decisions.

Borescope inspection camera

Looks inside wall cavities, HVAC chases, and crawl spaces without demolition. It lets us confirm mold growth in areas you cannot see from the surface.

Spore trap air sampler

Collects airborne spores on cassettes for lab analysis. We sample indoors and outdoors so the lab can compare counts and identify species.

HEPA vacuum

Used during remediation to capture spores without spreading them. HEPA filters trap particles down to 0.3 microns, which includes most mold spores.

Air scrubber with HEPA filter

Runs continuously during remediation to filter airborne spores and maintain air quality in occupied buildings. Essential for commercial spaces that cannot shut down.

Negative air machine

Creates negative pressure in containment zones so spores cannot escape into clean areas. We use it whenever remediation happens near occupied spaces.

Methods

IICRC Mold Remediation (AMRT) standards

We follow IICRC AMRT protocols for inspection, containment, and remediation. This ensures every report and scope meets industry standards that insurers and property managers recognize. It is the baseline for professional mold work in California.

California Department of Public Health guidelines

Our inspection and sampling methods follow California Department of Public Health guidelines for mold assessment. This includes air sampling protocols, moisture documentation, and report formatting. It is the standard that makes reports defensible.

Thermal imaging and moisture mapping

We combine thermal imaging with moisture meter readings to map wet zones without demolition. This method finds hidden mold behind drywall and under flooring. It also gives you a visual record of exactly where the problem is.

Air and surface sampling with lab analysis

We collect spore trap air samples indoors and outdoors, plus surface samples from visible growth. An accredited lab identifies species and counts spores. This turns a suspicion into documented evidence you can act on.

How commercial mold inspection runs in BONITA

BONITA's coastal climate keeps humidity high from May through September, with morning readings often between 70 and 85 percent. That moisture feeds mold in crawl spaces, attics, and HVAC systems across San Diego County commercial buildings. Older retail strips and single-story offices in Bonita Springs City Center and Imperial Bonita Estates often have crawl space access that traps humid air. Newer buildings in Bonita National Golf & Country Club and Village Walk of Bonita Springs tend to have tighter envelopes, which means roof leaks and HVAC condensation become the main moisture sources. We adjust our inspection approach based on building age and construction type. For a business mold assessment BONITA California property managers can rely on, we document moisture readings, spore counts, and affected square footage in every report. If you search commercial mold inspection in BONITA CA near me, we schedule within 24 to 48 hours and deliver the written report within two days of sampling.

Service Areas

Bonita Springs City Center

Older commercial buildings with crawl spaces and flat roofs. Humidity traps under floors and in attic cavities, making moisture mapping essential.

Bonita Fairways

Retail and restaurant spaces with HVAC systems that circulate air across multiple zones. Air sampling at supply vents is critical here.

Imperial Bonita Estates

Single-story commercial properties with crawl space access. Musty odors are the most common complaint we document in this area.

Village Walk of Bonita Springs

Newer construction with tight building envelopes. Roof leaks and HVAC condensation are the primary moisture sources we find.

San Carlos Estates

Mixed commercial and light industrial buildings. Attic mold from roof leaks and mold in HVAC systems are the most frequent findings.

Local Considerations

Coastal humidity from May through September

Morning humidity runs 70 to 85 percent, keeping crawl spaces and attics damp. Mold can grow within 48 hours of a moisture event. We schedule more inspections during these months.

Older building stock with crawl spaces

Crawl spaces trap humid air and feed mold on joists and subflooring. Musty odors rise into occupied spaces. We inspect crawl spaces on every commercial job in older BONITA buildings.

Low-slope commercial roofs prone to leaks

Flat and low-slope roofs develop leaks that soak insulation and sheathing. Attic mold follows within days. Thermal imaging finds the wet zones before mold becomes visible.

HVAC systems serving multiple zones

Mold in one air handler can circulate spores through the entire building. We sample at supply vents and return plenums to identify which zones are affected.

Restaurant HVAC mold resolved in one week

Before

A Bonita Fairways restaurant had a musty odor in the dining room for three months. Staff complained of headaches. Air samples showed 1,200 spores per cubic meter indoors versus 200 outside. The air handler had visible growth on the evaporator coil.

After

We documented the affected zones and provided a remediation scope. The client had the HVAC system cleaned and treated within one week. Post-remediation testing showed indoor spore counts at 150 per cubic meter, below outdoor baseline. Staff complaints stopped.

Maintenance & Follow-up

The client now schedules HVAC inspections every six months and changes filters quarterly. We recommend annual air sampling to confirm spore counts stay at baseline.

Before

A property manager in Imperial Bonita Estates noticed a musty smell in a ground-floor suite. The crawl space had visible mold on joists and subflooring. The tenant threatened to break the lease. The owner needed documentation for an insurance claim.

After

We inspected the crawl space with a borescope inspection camera and moisture meter, sampled the air, and documented 400 square feet of affected area. The report was accepted by the insurer within 48 hours. Remediation removed the mold, treated the joists, and installed a vapor barrier.

Maintenance & Follow-up

The property manager now inspects the crawl space annually and monitors humidity levels. A dehumidifier was installed to keep moisture below 50 percent.

Before

A commercial retail suite in Bonita Springs City Center was under contract, but the buyer's inspector flagged possible mold behind drywall near a window. The sale stalled for three weeks. The seller needed a professional report to move forward.

After

We performed a full commercial mold inspection BONITA CA, including thermal imaging, moisture mapping, and air sampling. The report showed no active mold growth and documented a past leak that had been repaired. The buyer accepted the report and the sale closed within two weeks.

Maintenance & Follow-up

The new owner monitors the window area seasonally and keeps a moisture meter on site. We recommend annual inspections to maintain documentation for future transactions.

Commercial mold inspection pricing in BONITA

Typical 2026 pricing for a commercial mold inspection BONITA CA runs $350 to $1,200 depending on building size, number of samples, and whether HVAC systems are included. A small office under 2,000 square feet usually lands near $450. A 10,000 square foot restaurant with multiple HVAC zones and crawl space access runs closer to $1,100. Lab fees are included. We quote flat rates before scheduling, so you know the cost before we arrive.

Pricing Factors

Building square footage

Larger buildings take more time to inspect and require more samples. A 1,500 square foot office might need two air samples, while a 10,000 square foot warehouse could need six or more. Square footage is the biggest driver of cost.

Number of HVAC zones

Each air handler and zone adds sampling points. Buildings with multiple rooftop units or split systems take longer to inspect and require more lab analysis. HVAC inspection is often the most valuable part of a commercial assessment.

Crawl space or attic access

Crawl spaces and attics add inspection time and may require additional safety equipment. Buildings without accessible crawl spaces or attics cost less to inspect. If access is difficult, we note it in the quote.

Number of air and surface samples

Each spore trap air sample and surface sample adds a lab fee. Most commercial inspections include two to six air samples plus surface samples if visible growth is present. More samples mean more data and higher lab costs.

Emergency or after-hours scheduling

Same-day and after-hours inspections carry a scheduling premium. If you need results fast for an insurance deadline or tenant issue, we prioritize your job. Standard scheduling within 24 to 48 hours has no premium.

Investment Range

$350 - $1,200 depending on building size and scope

Based on project scope

Value You Get

A commercial mold inspection costs a fraction of remediation. Catching mold early keeps cleanup under $2,500 instead of $15,000 or more. The report also gives you documentation for insurance, lease disputes, and property sales.

Frequently Asked Questions

Have questions? We have answers.

Call Us
How much does commercial mold inspection cost in BONITA CA?

Most commercial mold inspections in BONITA CA run $350 to $1,200 depending on building size, number of samples, and whether HVAC systems are included. A 2,000 square foot office typically lands near $450 with two air samples. A 10,000 square foot restaurant with multiple HVAC zones and crawl space access runs closer to $1,100. Lab fees are included in the quote.

What does a business mold assessment include in BONITA California?

A business mold assessment BONITA California includes a full walkthrough, thermal imaging, moisture meter readings, borescope inspection of wall cavities, air and surface sampling, lab analysis, and a written report with photos and a remediation scope. We inspect HVAC systems, crawl spaces, attics, and all occupied areas. You get one PDF with everything your insurer or property manager needs.

How often should commercial properties get mold inspection in BONITA?

Commercial properties in BONITA should get a mold inspection every 12 to 18 months, and within 48 hours after any water event, roof leak, or HVAC failure. Coastal humidity here runs 70 to 85 percent from May through September, which keeps moisture levels high. Restaurants and buildings with crawl spaces benefit from annual inspections. Buildings with prior mold history should be checked every six months.

Does commercial mold inspection in BONITA CA provide documentation for insurance?

Yes. Every commercial mold inspection BONITA CA we perform includes a written report with thermal images, moisture readings, lab results, and a remediation scope formatted for insurance claims. We follow IICRC and California Department of Public Health guidelines so adjusters can process the claim without back-and-forth. Most clients file within 48 hours of receiving the report.

Licensed, certified, and documented

Certifications

IICRC Mold Remediation (AMRT) by Institute of Inspection, Cleaning and Restoration Certification
IICRC Water Damage Restoration (WRT) by Institute of Inspection, Cleaning and Restoration Certification
ACAC Certified Mold Remediator (CMR) by American Council for Accredited Certification
EPA Lead-Safe Certification by U.S. Environmental Protection Agency
California Contractors State License Board (CSLB) by State of California

Reviews

Google

They inspected our office building after a roof leak and found mold behind two walls we did not know were wet. The report was detailed and our insurer accepted it immediately. Scheduling was easy and the technician explained everything.

Yelp

We manage several commercial properties in BONITA and have used them for three inspections. Every report is thorough and formatted the way our insurer wants. Turnaround is fast and pricing is fair.

BBB

Called them after a tenant complained about a musty smell. They inspected the crawl space, found the source, and gave us a clear scope for remediation. No pressure, no upselling. Just facts and documentation.

Google

We needed a mold inspection for a commercial refinance. They scheduled within 48 hours and delivered the report in two days. The lender accepted it without questions. Professional and efficient.

Related Services

Mold Inspection Near Me

If you searched mold inspection near me, our team covers BONITA and San Diego County with same-week scheduling. We inspect commercial and residential properties with thermal imaging and lab sampling.

Mold Inspection Near Me

Mold Inspection

A standard mold inspection covers visible growth, moisture sources, and air quality. For commercial buildings, we expand the scope to HVAC systems, crawl spaces, and tenant areas.

Mold Inspection

Mold Testing

Mold testing confirms what an inspection suspects. We collect spore trap air samples and surface samples, then send them to an accredited lab for species identification and spore counts.

Mold Testing

Mold Testing Near Me

Searching mold testing near me in BONITA means you want fast turnaround. We schedule within 24 to 48 hours and deliver lab-backed results in 24 to 72 hours after sampling.

Mold Testing Near Me

Certified Mold Inspector

Our certified mold inspector holds IICRC AMRT and ACAC CMR credentials. That matters when your report needs to stand up to an insurer, buyer, or attorney.

Certified Mold Inspector

Black Mold Inspection

Black mold behind drywall is the most common commercial finding we document. We confirm species with lab testing and map the moisture source feeding it.

Black Mold Inspection

Home Mold Inspection

We also inspect homes in BONITA and surrounding neighborhoods. The same thermal imaging and moisture meter tools apply, just scoped to residential square footage.

Home Mold Inspection

Residential Mold Testing

Residential mold testing covers air and surface samples for homes. Many BONITA homeowners book this after a roof leak or before buying a property.

Residential Mold Testing

Mold Remediation Company

When inspection confirms growth, our remediation team removes it using HEPA vacuums, antimicrobial solution, and containment plastic. We handle both inspection and remediation.

Mold Remediation Company

Emergency Mold Testing Services

After a flood or burst pipe, emergency mold testing services document the damage fast. We prioritize commercial properties because downtime costs money.

Emergency Mold Testing Services

Same Day Mold Testing

Same day mold testing is available for urgent commercial situations. Call before noon and we can often sample the same afternoon, with lab results in 24 to 72 hours.

Same Day Mold Testing

Basement Mold Inspection

Basement mold after flooding is common in commercial buildings with below-grade storage. We check walls, floors, and drainage paths with moisture meters.

Basement Mold Inspection

Attic Mold Testing And Removal

Attic mold from roof leaks shows up fast in BONITA's humid months. We test the sheathing and insulation, then remove affected materials if growth is confirmed.

Attic Mold Testing And Removal

Air Quality And Mold Testing

Air quality and mold testing measures spore counts indoors versus outdoors. This is the clearest way to show whether your HVAC system is circulating mold.

Air Quality And Mold Testing

Mold Remediation Near Me

If inspection confirms mold, our mold remediation near me service handles removal, containment, and post-remediation testing in one scope.

Mold Remediation Near Me

Crawl Space Mold Removal

Crawl space mold removal targets the musty odors rising into commercial spaces. We remove growth, treat joists, and install vapor barriers to stop recurrence.

Crawl Space Mold Removal

Bathroom Mold Removal Service

Bathroom mold from poor ventilation is common in restaurants and gyms. We remove growth, treat surfaces, and recommend exhaust upgrades to prevent it returning.

Bathroom Mold Removal Service

Toxic Mold Removal

Toxic mold removal addresses species like Stachybotrys that produce mycotoxins. We use containment plastic, negative air machines, and HEPA filtration to remove it safely.

Toxic Mold Removal

Mold Abatement

Mold abatement is the full removal process, from containment to disposal. We follow IICRC standards and document every step for your records.

Mold Abatement

Professional Mold Removal

Professional mold removal means trained crews, proper PPE, and verified results. We finish with post-remediation mold testing to confirm the building is clean.

Professional Mold Removal

Mold Cleanup Near Me

Mold cleanup near me searches usually mean visible growth. We clean, treat, and verify, then give you a report showing spore counts returned to normal.

Mold Cleanup Near Me

Water Damage Mold Remediation

Mold after water damage is the most common commercial claim we handle. We dry the structure, remove affected materials, and treat with antimicrobial solution.

Water Damage Mold Remediation

Mold Spore Testing

Mold spore testing uses spore trap cassettes to count and identify airborne spores. It is the fastest way to confirm whether a building has an active mold problem.

Mold Spore Testing

Post Remediation Mold Testing

Post remediation mold testing verifies that remediation worked. We sample after cleanup and compare indoor counts to outdoor baselines. Clearance reports are provided.

Post Remediation Mold Testing

Mold Fogging Treatment

Mold fogging treatment uses a fogging machine to apply antimicrobial solution into hard-to-reach spaces like HVAC ducts and wall cavities after removal.

Mold Fogging Treatment

Dry Ice Blasting Mold

Dry ice blasting mold removes growth from wood and metal without chemicals or abrasives. It is ideal for structural framing in commercial buildings.

Dry Ice Blasting Mold

Affordable Mold Remediation

Affordable mold remediation means clear pricing and no unnecessary demolition. We scope the work precisely so you pay for what is affected, nothing more.

Affordable Mold Remediation

24 Hour Mold Removal

24 hour mold removal is available for emergencies like burst pipes and flooding. We contain the area, remove growth, and document everything for insurance.

24 Hour Mold Removal

Odor Removal Mold

Odor removal mold service targets the musty smell that lingers after cleanup. We find the source, remove it, and treat the space with Benefect and Concrobium.

Odor Removal Mold

Book your commercial mold inspection BONITA CA today

If you smell something musty, see discoloration, or just closed on a commercial property, call us. We schedule most BONITA inspections within 24 to 48 hours and deliver the written report within two days of sampling. Flat pricing, no surprises.